Pushbutton Stainless Steel Outdoor Pedestal Bottle Filler (M-OBFM)
- Finish Available: All-Stainless Steel , Blue , Red , Green
- Material: Stainless Steel
Standard Features:
- All Stainless Steel Construction
- Battery Pack 6-AA
- 100 Mesh Inlet Strainer
- Laminar Flow Water Supply
- Hands Free Sensor Operation
- Lead and Cyst Filter
- Meets ADA Forward and Side Reach Requiements
**NOTE- The HB1 can only be used with the FRU1 and the HB1 would require a seperate water line and would have to be shut off and winterized during the winter months.**
Suggested Specifications:
Model M-OBF4 Bottle filler shall be activated by a 9 volt sensor or the push-button as standard. Unit shall contain a 100 mesh inlet strainer, lead and cyst filter, 6-AA battery pack and laminar flow spout. Construction shall be heavy gage, all stainless steel and pedestal base of bottle filler shall have four mounting holes. Access covers shall be secured with vandal-resistant stainless steel screws. A self-closing push-button, needing less than 5 pounds force, shall activate an internally mounted valve. Unit is certified to meet NSF/ANSI 61, Section 9, Public Law 111-380 (No-Lead) and CHSC 116875.
Estimated Lead time Prior to Shipment: 2-4 weeks
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Learn More about this warning
