Menu

FSW-26/18 Accessible Campfire Ring

 
FSW-26/18 w/Heat Shelf and swivel grate
FSW-26/18 w/Heat Shield
Pin Anchors (PA)
Angle Spade Anchors (AL)
Bolt-on Shelf (S5)
Pin Anchors (PA)
Angle Spade Anchors (AL)
Bolt-on Shelf (S5)
Heat Shield - Welded On (H)
$258.00
SKU: FSW-26/18
2-4 week lead time:
Qty:
Side Heights:
Anchor Systems:
Shelf Options:
Heat Shield:

FSW-26/18 Accessible Campfire Ring

Series Overview

The FSW Series Accessible Campfire Rings combine a single level swivel cooking grate with our flanged fire ring.  The 300 sq. inch single level Swivel Grate will move 180 degrees – from over the fire to completely out of the fire ring – for easy fire building and serving.  The handle is never over the fire.  This Swivel Grate design meets the ADA guidelines for reach and operability.

Fire ring is rolled from a 3/16" thick steel plate with an integral formed 1" wide flange around top edge.  This flange provides extra strength against heat warpage and eliminates a vertical edge.  Draft holes are provided for fire ventilation.

Model FSW-26 Series Campfire Ring features a 24” inside diameter and is available in a single side height of 16-7/8”.

The fire ring is filled with aggregate (not included) to about 9" above the ground to provide the elevated fire surface needed for wheelchair access.  This fill also insulates the ground to reduce the chance of root fires in heavily wooded areas.  Drain/draft holes are provided around the perimeter of the campfire ring.

The cooking grate is a single, welded component using ½-inch dia. steel bars, mounted on a 2-3/8” OD steel tube allowing it to swivel 180 degrees.  The operator handle includes a 1/8” x ½” flat bar coiled spring grip.  All grate bars are welded on both sides.  All fire rings are finished with high temp non-toxic black enamel paint.  Pin anchors provide a fixed location and must be set in concrete.  The firering will not tip up.

OPTIONAL Anchor Systems:
Angle Spade Anchors (/AL) are 3 spades attached around the firering and buried in the ground. The firering cannot be tipped up.

OPTIONAL: Model S-5 Bolt-on utility shelf 

OPTIONAL: Heat Shield (add /H to end of model number)

Warranty

5 Year Manufacturer's Warranty against defects in materials and workmanship.
1-year manufacturer's warranty against materials and workmanship of High Heat Paint.

Lead TIme:  2-4 weeks.  This item is "Built to Order"

 

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Learn More about this warning