Menu

3/4" Self-Closing Lever-Handle VA Jug FIller (M-ESH175VA)

 
 
 
$2,893.97
SKU: M-ESH175VA
2-4 week lead time:
Qty:
Depth of Bury:
Options:
Finish:
*** Download PDF Specifications Below

3/4" Self-Closing Lever-Handle VAJug FIller (M-ESH175VA)

3/4" Compression Jug Filler, Self-Closing Lever Handle, Reduced Pressure Spring, Side Inlet

Formerly M-ESHSC175VA

  • Mounting:  Post Mounted
  • Material:  Cast Iron
  • Bury Depth:  2 Ft , 3 Ft , 4 Ft , 5 Ft , 6 Ft
  • Freeze-Resistance:  Yes
  • Inlet Size:  3/4"
  • Activation:  Reduce-Pressure Lever , Lever
  • Finish Available:  Black or Green
  • Hydrant Inlet Type:  Female Threaded Side Inlet

Post Hydrant

MODEL M-ESH175VA

(FORMERLY M-ESHSC175VA)
3/4" FREEZE RESISTANT TRIMLINE POST HYDRANT WITH SHUT-OFF, HEAVY DUTY

STANDARD FEATURES

Model M-ESH175VA delivers year-round service outside or in unheated buildings. To provide freeze resistant functionality, the control valve is located below the frost line. The reduced-pressure, spring- loaded handle raises and lowers the internal supply line assembly, controlling the valve. The internal supply column is evacuated through drainage ports in the bottom and an integral internal shut-off valve ensures easy maintenance. This trimline design complements any setting. The hydrant must be operated fully "ON."

SUGGESTED SPECIFICATIONS

Hydrant shall be model M-ESH175VA. Unit shall be capable of year-round use in freezing weather and shall include an integral shut-off valve.

Unit shall extend below grade level so that centerline of supply inlet is positioned at or below frost line. Unit shall include an integral shut-off valve. VERY IMPORTANT: Supply water pressure for this hydrant shall not exceed 40 psi. If necessary, pressure-reducing valve shall be installed in supply line. Inlet shall have a threaded connection.

Water shall be gravity-evacuated from inner supply column when valve is shut off.

Valve shall be operated by lever handle spring-loaded for closure. Housing shall be cast aluminum, finished with a heavy grade of oil-based VS bronze enamel. Handle shall be an aluminum-bronze casting. All castings shall be manufactured in the USA and comply with ARRA standards, to include machining, assembly and painting.

Inner supply assembly shall incorporate solid-brass castings. All solid-brass castings shall conform to ASTM standards B61 and B62. Lead-free castings are used in all waterways.

Outer casings and inner supply line shall be galvanized-steel pipe.

Nozzle shall be solid brass casting, threaded for 3/4" hose connection.

Lead Time:  2-4 weeks before shipment.  This item is "Build to Order".

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Learn More about this warn