Barrier-Free Outdoor Wall Mount Bottle Filler (M-OBA)
M-OBA4 Series is an Outdoor Wall Mounted Bottle Filler. The unit has a barrier-free arm where the bottle filler is mounted. Bottle filler shall be activated by a 9 volt sensor or a pushbutton as standard. Unit shall contain a 100 mesh inlet strainer, lead and cyst filter, 6-AA battery pack and laminar flow spout.
This Wall Mount Bottle Filler can be combined with the GRC Drinking Fountain.
- All Stainless Steel Construction n Battery Pack 6AA
- 100-Mesh Inlet Strainer
- Laminar Flow Water Supply
- Hands-Free Sensor Operation
- Pushbutton Operation Included
- Lead and Cyst Filter
- Meets ADA Forward and Side Reach Requirements
Ships UPS Ground
- 115v Plug-in transformer
- Pushbutton and hands free sensor operated bottle filler
- 100 mesh inlet strainer
- Laminar flow water supply
- 1.0 GPM fill rate
- Lead and cyst filter for bottle filler
- Meets ADA forward and side reach requirements
- Vandal-resistant design
- Resistant to sunlight, heat, moisture and wear
Model M-OBA4 is a wall mounted, vandal resistant round bottle filler. Bottle filler shall be activated by a 9- volt sensor or a pushbutton as standard. Unit shall contain a 100-mesh inlet strainer, lead and cyst filter and laminar flow spout. Access covers shall be secured with vandal-resistant stainless steel screws. A self-closing pushbutton, needing less than 5 pounds force, shall activate an internally mounted valve. When installed properly, the bottle filler complies with ADA forward and side reach requirements. Bottle filler is fabricated of type 304 stainless steel. Unit complies with ANSI A117.1, Public Law 111-380 (NO-LEAD), CHSC 116875 and NSF/ANSI 61, Section 9.
Lead Time: 2-4 weeks before shipment. This item is "Build to Order".
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Learn More about this warning