Safety Rider "V" Recycled Rubber Mini Speed Hump (G23500V)


Safety Rider "V"  Recycled Rubber Mini Speed Hump (G23500V)

Speed Hump Section 35.5"  x 19.5"   x 2.1", High Yellow, 36 lbs (includes installation NOT hardware)

Estimated Lead time prior to shipment:  1-2 weeks.  This item is "BUILT TO ORDER""

The new and improved Safety Rider® V is an affordable solution that slows vehicles down while maintaining a continuous traffic flow. The recycled rubber mini hump is constructed of interlocking units allowing you to customize the solution to fit the width of any roadway. Our unique end caps include reflective tape, further enhancing visibility and safety.


WARNING: This product can expose you to chemicals including Arsenic, Cobalt, Cadmium, Lead, Chromium, Nickel Compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to

The Safety Rider® V mini speed hump is an economical speed reduction device made from vulcanized rubber. Unlike asphalt, the rubber mini hump is molded to spec creating a uniform and reliable solution to slow vehicle traffic. The mini humps are simple to install and do not require road closures or ideal weather conditions. Plastic shields are inserted into pre-drilled holes and the units are bolted down to keep them from shifting.
The Safety Rider® V is ideal for slowing traffic in front of gates, toll booths, all parking access facilities, and anywhere slow traffic flow is required. Our durable solution also holds up well to heavy load-bearing truck traffic.
Reflective tape on both the mid-sections and end caps provide optimal visibility, even on a dark night, alerting drivers well in advance.
Safety Rider® V is covered by a 3 year warranty on the product; 1 year warranty on the tape (under normal use).
Safety Rider® V mini humps are:
Made of 100% recycled rubber
Interlocking design expands to any road width
Tongue and groove system keeps product firmly in place
High visibility with tape on mid-sections and end caps
Easy installation on any paved surface
No skilled labor required
Lightweight and perfect for permanent or temporary use
Maintenance free
Warranty: 3 years on the product; 1 year on the tape (under normal use)
Used in the following situations:
Speeding of motor vehicles create danger and noise pollution
Temporary installation is required to test traffic safety programs, during street fairs, or other pedestrian activity events
Only temporary installation is allowed due to snow removal
Where heavy truck traffic is common
Shipping ports for sea cargo
General description:
Safety Rider® V is constructed from three different interlocking modules: middle unit, left end cap (with female interlocking recess) and right end cap (with male interlocking extension). The nominal footprint dimensions of each module are: 35.4" (90 cm) by 19.7" (50 cm). The nominal thickness of each module is 2" (5 cm). The end caps have the same footprint as the middle modules. The weight of each middle module of the Safety Rider® V is 36 lbs (16.3 kg). The weight of each end cap module is 32 lbs (14.5 kg). The Safety Rider® V rubber speed hump middle and end cap modules are outfitted with reflective yellow tape for increased visibility.
Molded recycled rubber manufactured by GNR Technologies.
Physical properties:
minimum tensile strength: 500 psi
shore hardness: minimum 65A
density: 0.6 oz/cu in [1.04g/cm3]
Rubber modules are available in black with yellow reflective tape.
3 years on the rubber; 1 year on the tape (under normal use) installed as per the manufacturer's installation instructions.
Safety Rider® V Mini Hump unit sections
Lag bolts 3/8" diameter, 4" long - 6 per section (NOT included)
Plastic shields (anchors), 9/16" diameter 3" long - 6 per section (NOT included)
Zinc plated steel washers - 6 per section (NOT included) 
Installations Tools:
Measuring tape
Heavy duty hammer drill
Drill bits - carbide tip, 9/16" diameter, 10-12" long
Tool for installing the plastic shields
Sledge hammer (for final adjustment)
11/16" drive socket with an extension and power tool
Street broom
Utility knife
Crow bars, gooseneck wrecking bars
Portable blower for cleaning installation holes
Gloves, safety glasses, traffic cones, drums or barricades for securing the site
2-4 installers (depending on the solution installed)
Installations Instructions:
Step 1. 
Determine the location of the Safety Rider® V mini hump and sweep the surface clean of debris / dust. Use chalk to mark the center lines (parallel and perpendicular to the direction of the street) and border lines on the surface.
Step 2.
Assemble and position the units, starting from the center line (parallel to the direction of the street).
Note: Make sure the units are tight and well aligned before moving on to step 3.
Step 3. 
Drill 9/16" diameter holes into the surface, through the existing holes of the placed units. The holes should be 3 1/2" - 4" deep in order to accommodate the plastic shields that are 3" long. After each hole is drilled, insert a plastic shield in order to keep the units from shifting.
Note: Make sure the holes are clear of dust and debris before installing the shields. (A portable blower is useful for this purpose)
Step 4.
Insert the bolts and steel washers into the product installation holes and tighten every element. Do not over tighten.
Mini Humps require minimal maintenance. Periodically inspect the bolts and tighten if necessary.