Menu

Safety Rider Mini Speed Hump (G23500)

 
$119.73
SKU: G23500
Minimum Quantity: 12
: Online shipping not available. ADD ITEM TO CART and Request Quote
Qty:

Safety Rider Mini Speed Hump (G23500)

Speed Hump Section 35.5" x 19.5" x 2.1" High Yellow, 36 lbs (includes installation hardware)

Estimated Lead time prior to shipment:  1-2 weeks.  This item is "BUILT TO ORDER""

WARNING: This product can expose you to chemicals including Arsenic, Cobalt, Cadmium, Lead, Chromium, Nickel Compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

 

The Safety Rider® rubber mini hump is a unique modular traffic calming device designed to slow traffic while maintaining a continuous traffic flow. The mini hump is constructed of interlocking units with a tongue and groove system. This allows the humps to be linked together to cover the width of any roadway. End caps are available to provide a smooth finish to the ends of the hump.

Features
 
The Safety Rider® is constructed from 100% recycled tires. Unlike asphalt humps, our mini humps are preformed for a uniform and consistent profile and a smooth, safe ride. The mini humps are simple to install and do not require road closures. Plastic shields are inserted into pre-drilled holes and the units are bolted down to keep from shifting. The Safety Rider® can be easily removed for storage or relocation.
Mini speed humps are ideal for slowing traffic in school parking lots and crossings, playground areas, hospitals, parking facilities, and anywhere a slow traffic flow is required. Heavy load bearing truck traffic is ideally facilitated by the Safety Rider® mini hump.
Molded highly reflective tape provides optimal visibility even on a dark night, alerting drivers well in advance.
Safety Rider® mini humps are covered by a 3 year warranty; 1 year on the tape (under normal use)
 
Features
 
The Safety Rider® is constructed from 100% recycled tires. Unlike asphalt humps, our mini humps are preformed for a uniform and consistent profile and a smooth, safe ride. The mini humps are simple to install and do not require road closures. Plastic shields are inserted into pre-drilled holes and the units are bolted down to keep from shifting. The Safety Rider® can be easily removed for storage or relocation.
Mini speed humps are ideal for slowing traffic in school parking lots and crossings, playground areas, hospitals, parking facilities, and anywhere a slow traffic flow is required. Heavy load bearing truck traffic is ideally facilitated by the Safety Rider® mini hump.
Molded highly reflective tape provides optimal visibility even on a dark night, alerting drivers well in advance.
Safety Rider® mini humps are covered by a 3 year warranty; 1 year on the tape (under normal use).
View our installation video for the Safety Rider®Mini Hump
Safety Rider® mini humps are:
Made of 100% recycled rubber
Interlocking design expands to any road width
Tongue and groove system keeps product firmly in place
High visibility with embedded highway tape
Easy installation on any paved surface
No skilled labor required
Lightweight and removable
Maintenance free
Warranty: 3 years on the product; 1 year on the tape (under normal use)
Applications:
Used in the following situations:
Speeding of motor vehicles create danger and noise pollution
Temporary installation is required to test traffic safety programs, during street fairs, or other pedestrian activity events
Only temporary installation is allowed due to snow removal
Where heavy truck traffic is common
Shipping ports for sea cargo
 
Safety Rider® Section 
Dimensions: Standard Module
(L) 35.5" x (W) 19.5" x (H) 2.1" - 36 lb.
 
 
General description:
 
Safety Rider® mini humps of required lengths are constructed using the interlocking middle and the end cap modules. The standard foot print dimensions of each module are 35.5" by 19.5". The end caps are with the similar footprint as the middle modules. The weight of the middle modules is 36 lbs each, the end cap modules weights 33 lbs. Each unit is bolted to a paved road surface using six lag bolts 3/8" dia. through a plastic shield installed in the road surface.
Dimensions of the modules:
width 35.5" (+/- 1/16")
length 19.5 (+/- 1/8")
thickness 2.1" (+/- 1/8")
Material
Compression molded 100% recycled rubber and polyurethane composite
Physical properties:
tensile strength: minimum 500 psii
shore hardness: minimum 70A
specific gravity 1.1-1.5
Marking:
Rubber modules are available in black with yellow or white in-molded reflective tape
Warranty
3 years on the rubber; 1 year on the tape (under normal use) installed as per the manufacturer's installation instructions.
 
Installation Guide
 
Components
Mini Hump unit sections
Lag bolts 3/8" diameter, 4" long - 6 per section (included)
Plastic shields (anchors), 9/16" diameter 3" long - 6 per section (included)
Zinc plated steel washers - 6 per section (included)  
 
Installations Tools
 
Chalk
Measuring tape
Heavy duty hammer drill
Drill bits - carbide tip, 9/16" diameter, 10-12" long
Tool for installing the plastic shields
Hammer
Sledge hammer (for final adjustment)
11/16" drive socket with an extension and power tool
Street broom
Utility knife
Crow bars, gooseneck wrecking bars
Portable blower for cleaning installation holes
Gloves, safety glasses, traffic cones, drums or barricades for securing the site
Crew
2-4 installers (depending on the solution installed)
 
 
Installations Instructions
 
Step 1. 
 
Determine the location of the Safety Rider® mini hump and sweep the surface clean of debris / dust. Use chalk to mark the center lines (parallel and perpendicular to the direction of the street) and border lines on the surface.
 
Step 2.
 
Assemble and position the units, starting from the center line (parallel to the direction of the street).
Note: Make sure the units are tight and well aligned before moving on to step 3.
 
Step 3. 
 
Drill 9/16" diameter holes into the surface, through the existing holes of the placed units. The holes should be 3 1/2" - 4" deep in order to accommodate the plastic shields that are 3" long. After each hole is drilled, insert a plastic shield in order to keep the units from shifting.
Note: Make sure the holes are clear of dust and debris before installing the shields. (A portable blower is useful for this purpose)
 
Step 4.
 
Insert the bolts and steel washers into the product installation holes and tighten every element. Do not over tighten.
 
 
Maintenance
 
Mini Humps require minimal maintenance. Periodically inspect the bolts and tighten if necessary.