Rounded Box Chilled Barrier-Free Wall Mount Bi-Level Drinking Fountain

SKU: A152
Estimated Lead Time prior to shipment: 1-3 weeks. T:
Additional Info

Rounded Box Chilled Barrier-Free Wall Mount Bi-Level Drinking Fountain-REFRIGERATED

ADA, Wall Mounted, Bi-Level Rounded Box Refreigerated Drinking Fountain, 8 GPH (32" Width-STD)

Regularly Furnished:

[Standard Model] All-Stainless Steel; Lead-Free Stainless Steel Bubblers; 32-inch (81.28 cm) Wide Louvered Back Panel; Chiller Rated at 8 Gallons per Hour (30.3 Liter per Hour); Mounting Hardware

Other finish and bubbler variations are available


Standard Features:

  • Child or Adult ADA Compliant (when properly installed)
  • 18 gage, 304 stainless steel
  • Polished stainless steel, anti-rotation, non-squirt bubbler
  • 100 mesh inlet strainer
  • Vandal resistant screws
  • P-trap
  • Mounting frame
  • 32 inch trim panel
Suggested Specifications:
Model A152408S is a wall mounted, vandal resistant bi-level pressure electric drinking fountain
that shall deliver a minimum of 8.0 GPH (30.3 LPH) of water at 50°F (10°C) cooled from 80°F
(26.7°C) inlet water and 90°F (32.2°C) ambient. Unit shall be made from 18 gage, 304 stainless
steel with a brushed finish. Unit shall be activated by self- closing, frontal push pads, by using
less than 5 pounds of force, which activates internally mounted valves with adjustable stream
regulators controlling the water flow. Cooling system shall use R-134a refrigerant and be capillary
tube regulated. An adjustable thermostat with an off position shall regulate the refrigeration
system. Bubblers shall be polished stainless steel with non-squirt features and operate on a
water pressure range of 20-105 psig. Unit shall have uniquely designed, two-piece contoured
bowls with P-traps integral to the unit. Unit shall be listed by Underwriters Laboratories for
both the US and Canada and is compliant to the Air Conditioning and Refrigeration Institute
Standard 1010. Unit is certified to ANSI A1 17.1, Public Law 1111-380 (NO-LEAD), CHSC
116875 and NSF/ANSI 61, Section 9. Fixture meets ADA, ADA Standing Person, and ADA
Child requirements when mounted appropriately.
Estimated Lead Time prior to shipment:  1-3 weeks.  This item is "Built to Order".

WARNING: Cancer and Reproductive Harm -

Learn More about this warning