Home
About Us
Contact Us
Terms Of Service
Privacy Notice
Your Account
Your Cart
Checkout
Live Support
Browse
Agricultural Products
Barricades & Barriers
Benches
Bleachers
Building Supplies
Concrete Amenities
Concrete Planters
Crowd Control
Drinking Fountains
Emergency & Safety
Entertainment
Fencing
Fiberglass Planters
Flashlights
Food Equipment
Gates
Go Green
Hospitality
Landscape & Garden Tools
Material Handling
Park Equipment
Planters
Plastic Road Barricades
Queuing
Receptacles
Refrigeration
Safety
Seating
Signs
Stone Site Amenities
Tables
Tools
Traffic Control
Tubing, Rails & Fittings
Turnstiles:
Full Height Turnstiles:
Electric
Mechanical
Optical Turnstiles
Waist High Turnstiles
Manual Revolving Door
Your Cart
Your cart is empty
Mechanical
Full Height Metal Detection Turnstile
Roto-Gard Full Security Turnstile
Mechanical Turnstile - Galvanized Steel
All Items
Home
>
Turnstiles
>
Full Height Turnstiles
>
Mechanical
>
Bi-Directional Double Full Height Turnstile
Bi-Directional Double Full Height Turnstile
larger image
Call for Price
Model: MPT53
Contact Sales
Bi-Directional Double Full Height Turnstile MPT 53
MPT Double Full-Height Turnstile, bi-directional, Solenoid Locking System
115 VAC; Modular design, galvanized cage and column, 120 degree U bars, includes plates for access readers. Top control housing made of mild steel and powder coated with RAL7042 Gray
Includes controllers MSC10-E100
Note: Standard configuration is locked in both directions with no power applied. When specified on Purchase Order to rotate in one or both directions; this will be configured at the factory at no additional cost. When ordered at a later date the kit is available at additional cost (part number 1031.53030)
Specifications
(268 KB Adobe Acrobat Document)
Description
The MPT53 series of full height turnstiles have been specifically developed to control simultaneous bi-directional pedestrian control of two independent turnstiles where limited space is available. The turnstile has been designed as a modular system and can easily be assembled on site by hand and without the need of heavy lifting devices.
The turnstile consists of an outer cage section and two center columns, each incorporating a 3 x 120° offset 'U' bar configuration. The MUC Controllers and the torque positioning drives are mounted on top of the cage and within a sheet metal enclosure. Additional space has also been made available for the installation of access control equipment.
The turnstile is designed to be installed directly to concrete surfaces, or in the case of paved areas an optional foundation frame is available.
Housing
The turnstile consists of a left and right hand outer vertical bar section, a central 'U' bar section and two central rotating columns, each incorporating a 3 x 120° offset 'U' bar configuration.
The control and drive mechanism are housed within a folded sheet metal enclosure which is located above the central columns. As standard all sections are fully "hot dip" galvanized after fabrication and can also be powder coated in RAL 7042 gray upon request. Optional and special RAL colors and either 304 or 316 grade stainless steel construction are also available upon request.
Access control devices such as card readers can easily be fitted to the turnstile cage. A mounting plate fixed at each entry point on the outer vertical bar sections of the turnstile enables ease of installation of such control devices.
Technology
The MPT 53 turnstile is rotated manually by the user. The locking mechanisms contain a cam plate and two locking solenoids.
Each unit is controlled by our MSC10 E-100 Controller. This controller has been designed specifically by Magnetic for this application. Upon receiving a pulsed input, the controller releases the respective solenoid and allows the center column to be turned 120° by hand, the center column then locks back into position. The turnstile is then ready to receive additional inputs. The options available, in the event of power fail are: 'locked' or 'free wheel' in one or both directions.
Note: Requires mounting bolts & hardware part # MPTA15980021
Options: (Additional Cost)
Mounting bolts & hardware part (MPTA15980021)
Foundation Ring for MPT< consisting of Galvanized Steel Including adjusting screws 15 cm tall, for installations on/in unstable surfaces. (2071.5013-53)
Additional kit for MPT33C to change from unlocked with no power to locked with no power in either 1 or both directions (1031.5303-53)
Manual release kit to unlock turnstile whether or not power is supplied to the unit (1031.5306-53)
View more items in
Mechanical
Copyright © 2005-2008
Franklin Marketing, Inc.