MARKSTAAR - Flag Pole w/ Ball Finial

Online Discount! Save an instant 3% when you order online.

Browse

Your Cart

Your cart is empty

Flag Poles

Flag Pole w/ Ball Finial

All Items

Flag Pole w/ Ball Finial

larger image

$434.97
Model: XBX-XX

Height & Base:

Flag Poles:

These attractive, fully anodized aluminum flagpoles give years of problem-free use and maintenance. And they are 100% made in the USA.

Flagpoles are available in a variety of sizes, and may be mounted directly into a concrete footing, surface mounted with the convenient swing base, or secured with a basic bolt down base. The swing base design allows the pole to be easily erected or taken down by one person, and facilitates easy repairs.

The poles are extruded (seamless) aluminum pipe, using alloy #6063-T6. This provides the poles with maximum strength with minimum weight. The pipe is then anodized bright silver. The pole castings are poured aluminum finished to a lasting shine. The sectional design allows easy assembly and installation. If the pole is damaged, only the affected section needs to be replaced.

These are complete kits with all equipment needed to raise and lower the flag.

EB Models: Embedded Base Installation:
The EB Model poles are available as 2-section or 3-section poles. The bottom 18 inches of the pole pipe is cemented into the ground footing. The above ground height of the EB pole is 1-1/2 ft. less than

Embedded Base (EB)
Swing Base (SB) Pole can be tilted down to ground.	Swing Base (SB) Pole secured in raised position.
Surface Mount Bolted Base (BB)

the pole height number.

SB Models: Swing Base Installation:
The SB Model poles are available as 2-section or 3 section poles. The swing base assembly is anchored to the concrete footing and the bottom pole section is installed into the base. This hinged mounting allows the pole to be laid over for easy maintenance. The above ground height of the SB pole is the same as the pole height number.

BB Model: Bolted Base Installation:
The BB Model pole is available only as a 2-section, 18 ft. pole. The anchor base is cemented in and the bottom pole section is installed. The above ground height of the BB pole is the same as the pole height number.

Additional Flag Poles Specifications: (all dimensions nominal)
Model EB2:	Bottom section is 3-1/2” OD x 1/8” wall. Top section is 2-3/8” OD x 1/8” wall.
Model EB3:	Bottom section is 3-1/2” OD x 3/16” wall. Middle section is 2-7/8” OD x 1/8” wall. Top section is 2-3/8” OD x 1/8” wall.
Model SB2:	Bottom section is 3-1/2” OD x 1/8” wall. Top section is 2-3/8” OD x 1/8” wall.
Model SB3:	Bottom section is 3-1/2” OD x 3/16” wall. Middle section is 2-7/8” OD x 1/8” wall. Top section is 2-3/8” OD x 1/8” wall.
Model BB2:	Bottom section is 3-1/2” OD x 1/8” wall. Top section is 2-3/8” OD x 1/8” wall.

Model No.	Height (ft.)	Base	Number of Sections	Maximum Flag Size (ft.)
EB3-20	20	Embedded	3	3 x 5
EB2-20	20	Embedded	2	3 x 5
EB3-24	24	Embedded	3	3 x 5
EB3-30	30	Embedded	3	4 x 6
EB3-36	36	Embedded	3	4 x 6
SB3-20	20	Swing	3	3 x 5
SB2-20	20	Swing	2	3 x 5
SB3-24	24	Swing	3	3 x 5
SB3-30	30	Swing	3	4 x 6
BB2-18	18	Surface Bolted	2	3 x 5

View more items in Flag Poles