MARKSTAAR - Car Park Barrier

Browse

Your Cart

Your cart is empty

Vehicle Access Control

Economy Barrier

Long Arm Traffic Barrier

Car Park Barrier

All Items

Car Park Barrier

larger image


Call for Price
Model: MIB30
Contact Sales

Car Park Barriers MIB 30

Traffic barrier 115V, 60 Hz, 120 watt in RAL 9010 white, RAL 2000 orange, RAL 1028 yellow.
Opening or closing time 1.4 to 1.9 seconds with our standard octagon arm flange.
Includes: MLC controller with display, built in position sensor provides precise barrier arm status information to the controller; up/ normal/ down switch, power switch, relay outputs, convenience receptacle, and built in dual channel loop detector.
Maximum arm length for MIB 30 – 12 foot octagon arm
Maximum arm length for MIB 30 automatic open on power failure is 10 feet.

Technical Description
The combination of our proven and reliable electric motor with a lever system represents a simple and extremely reliable drive solution. It permits short opening and closing times without the barrier boom bouncing in the end positions. The lever system locks the barrier boom at both end positions. In the event of power failure, it can still be moved easily by hand.
The complete drive system is attached to the barrier housing as a single unit, and can easily be removed from the housing by removing the mounting screws.
A built in spring mechanism provides a precise counterbalance for the barrier boom. The springs are factory set to correspond with the boom length prior to delivery. If necessary, the springs can be easily reset in situ during assembly, for example if the barrier boom is shortened or if signs are attached to the boom.
It is also a simple matter to change the handing on-site from right-axial to left-axial.

The Drive Unit
The barrier is driven by a torque motor mounted on a central cast aluminum support. This support also contains the bearings for the drive shaft, the gear box and the mounting for the counterbalance springs.
The torque motor is designed for alternating current. It requires neither limit switches nor a friction clutch. It is maintenance-free and can be stalled in any position without the risk of damage. In the end positions the motor remains under power assisting the mechanical locking of the barrier boom via the lever system. This reduces the power consumption to a minimum. This power is dissipated in the form of heat, which prevents the occurrence of condensation and corrosion. This guarantees reliable and problem- Free operation, especially in cold climatic conditions.
The built-in position sensor provides precise barrier boom status information to the associated controller. The self-learning control unit guarantees optimum braking, without the barrier boom bouncing or swinging out of the end position. The barrier is factory wired, tested, ready to connect and supplied with all necessary mounting accessories.

Housing
The housing is manufactured from 14 gauge zinc plated sheet steel on to a base frame of stainless steel, then phosphate and powder coat finished for maximum protection against corrosion.
Control units are mounted onto a removable zinc plated sheet steel panel. All of the components within the barrier housing are readily accessible through the maintenance door and removable top cover. The housing is supplied in an RAL 2000 orange color finish as standard. Other colors are available on request, at extra cost.

Barrier Boom
The barrier boom is extruded from highly stable aluminum alloy to produce an octagonal profile of 4" x 2 1/8" x 1/16" and finished with an RAL 9010 white powder coat then applied with bright red reflective tape strips. Hence the boom is readily visible even at night. If the barrier boom is to be any longer than 12’, it is necessary to fit either a pendulum support or fixed support post.
If the available vertical height is restricted, the barrier can, at extra cost, be supplied with an articulated boom. In order to calculate the dimensions of the articulated boom, the barrier length (D=) and height (H=) must be supplied.

The Control Unit
The MLC controller was especially developed by Magnetic. Using microprocessor technology to ensure a flexible, modern approach to the control techniques, it possesses all appropriate expansion options including an I/O box and serial communications interface. The MLC and ancillary control units are fitted on to the fold out mounting plate.

Available Versions
Barriers may be supplied with the barrier boom fitted to either the right or left hand side. In its standard configuration the maintenance access door is positioned on the road side, although on request it can be any one of the other sides.

Arm Flanges: (additional cost)

Swing away flange for octagonal arm up to 12 feet (MSB 5N-025) 1031.5052
Swing away flange for round arm up to 10 feet (MSB 4B-030) 1031.0282
Wood arm flange (tapered 1" x4" arm) 1031.5037
Wood arm Adapter for octagonal flange, Minimum requirement if wooden arm is used (2069.0047)

Barrier Arms: (additional cost)

8 foot aluminum barrier arm octagonal shaped, standard arm flange used (MSB 5N-025)
10 foot aluminum barrier arm octagonal shaped, standard arm flange used (MSB 5N-030)
12 foot aluminum barrier arm octagonal shaped, standard arm flange used (MSB 5N-035)
8 foot articulating aluminum arm octagonal shaped, standard arm flange used (MSB 5K-025)
10 foot articulating aluminum arm octagonal shaped, standard arm flange used (MSB 5K-030)
12 foot articulating aluminum arm octagonal shaped, standard arm flange used (MSB 5K-035)
12 foot aluminum octagonal swing away arm, requires part #1031.5052 (MSB 5B-035)
10 foot aluminum round swing away arm, requires part #1031.0282 (MSB 4B-030)
Wood Arms – requires part # 2069.0047 or 1031.5037

Note: Customer to provide articulating arm dimensions.

Accessories: (additional cost)

Extra Sensory arm reverse feature (software at time of order) (PR24036)
48" Foam protective edge for octagon arm, White (3147.1000)
48" Foam protective edge for wood arm, Yellow (3147.1001)
Installed Invisa Smart Gate Sensor and Insulator block – recommended (MSR1-E900)
Invisa Smart Gate Sensor and Insulator block (Un-installed) (6000.0055)
Invisa Smart Gate Insulator block (Un-installed) (6000.0056)
Contact for release of barrier arm (arm mounted – contact open) (1031.5061)
MLC-Programming Chip Card, with software (1031.0225)
RS232 or RS4222 or RS485 com box, requires MLC10 or MLC11 (MLC50-E100)
24VDC I/O BOX, 6 Inputs / 7 Outputs, Input/Output extension module for gate and induction loop status, directional logic, differential count, arm status (MLC30-E100
Supporting pillar w/ electro-mechanical arm lock, RAL 2000 orange only (MAP 5H-100))
Custom shade RAL color powder coat for MAP support pillars (Custom Color)
Control unit for electro-mechanical arm lock (MMV1C-100)
1 signal lamp 24VDC mounted on to MSB 5N-*** arm, 100mm dia.(Orange Lens) (1052.0016)
Control unit for 3 signal lamps at maximum (MSS1C-100)
Glue on edge protection of sponge rubber 7/8 x 3/8 inches (3147.0007)

larger image

View more items in Vehicle Access Control