MARKSTAAR - Economy Barrier

Browse

Your Cart

Your cart is empty

Vehicle Access Control

Long Arm Traffic Barrier

Car Park Barrier

All Items

Economy Barrier

larger image


Call for Price
Model: MBE50
Contact Sales

Economy Barrier – MBE50*-C100

115V, 60hz, 65 Watts, in RAL 9010 white or RAL 2000 orange. Opening 4.6 second, closing time 4.9 second with octagon arm flange. Each gate is pre-adjusted for the arm that is ordered.
Includes: MBE controller, limit switch, up/normal/down switch, receptacle, and power switch. MBE controller includes: 6 inputs and 4 form C output relays, and 500 mA 24 VDC supply. MBE controller has 11 functions for most applications.
Maximum arm length is 15 feet.
Maximum arm length auto. open on power failure 12' feet.

Description
The ECOLINE barrier represents the combination of our proven Magnetic technology with a single phase torque motor, housing and conventional control for both manual and automatic operation. Additional features of the ECOLINE barrier are easy setup and installation. These barriers are suitable for all applications with simple requirements like gated communities, small car parks or those controlled by a guard. The controller and a limit switch are integrated in the barrier. The barrier boom may be supplied in either standard or customized length.

The Drive Unit
The reliable direct drive consists of a maintenance-free torque motor and the lever system which enables an harmonious movement of the barrier boom. The counterbalance springs balance the boom weight. Using the lever system the barrier boom is locked in both end positions open or closed. In case of power failure the barrier can easily be opened manually. This can be done without using any tools. The spring adjustment that corresponds to the boom length can be done quickly on site. This is necessary for every installation. An automatic opening of the barrier boom in case of power failure can be achieved by a stronger adjustment of the springs. In the end positions the motor remains under power and the low power consumption of the motor is dissipated in the form of heat which guarantees the barrier can be operated at low temperatures and also prevents the occurrence of condensation in the motor and housing.

The Housing
The barrier consists of a self-supporting and compact housing with a UV-resistant and environmentally-friendly powder coat finish for maximum protection against corrosion. The housing color comes as standard in RAL9010 White. The controller and the power switch are located on the mounting plate. Pre-mounted DIN-rails enable an easy installation of additional electrical devices. The mounting plate and the drive unit within the barrier housing are readily accessible through the maintenance door at the left hand side. The top cover can also easily be removed.

The barrier boom
The barrier boom is extruded from highly stable aluminum alloy, to produce an octagonal profile of 4” x 2 x 1/16” thickness and finished with a RAL 9010 white paint then applied with red high reflective tape strips. The boom is readily visible even at night. If the barrier is to be any longer than 14 ft, it is imperative to use either a pendulum support or support pillar. If the available vertical height is restricted, the barrier can optionally be supplied with an articulated boom.

The Control Unit
The ECOLINE controller enables the barrier to be operated manually or automatically. There are 11 standard functions to be selected for operating the barriers. These functions cover all standard applications. The connection of additional safety equipment for pedestrians is possible. Besides the standard operating modes several special functions are additionally integrated. These enable the operation of traffic lights. The storage of opening pulses (vent signal count) makes access control possible. After power failure there are three possibilities to restart the barrier: Manual reset, signal reset or automatically. For safety reasons the manual reset function is factory-set. This means the barrier remains open as long as the reset button at the control unit is pressed. The electrical connections are made on labeled terminal blocks. The motor is driven by a TRIAC output stage. All signal inputs and relay outputs are opto-coupled. Selection of the operating mode and the special functions are by a rotary switch and DIP-switch. For the power supply of optional external devices for example induction loop detectors 24 V DC / 0.5 A is supplied.

Barrier Arms: (Additional Cost)

8 foot aluminum barrier arm octagonal shaped (MSB 5N-025)
10 foot aluminum barrier arm octagonal shaped (MSB 5N-030)
12 foot aluminum barrier arm octagonal shaped (MSB 5N-035)
15 foot aluminum barrier arm octagonal shaped, pendulum support is required (MSB 5N-045)
8 foot Articulating aluminum barrier arm octagonal shaped ** (MSB 5K-025_ECO)
10 foot Articulating aluminum barrier arm octagonal shaped ** (MSB 5K-030_ECO)
12 foot Articulating aluminum barrier arm octagonal shaped ** (MSB 5K-035_ECO)
14 foot Articulating aluminum barrier arm octagonal shaped ** (MSB 5K-045_ECO)
Wood Arms – required part # 2069.0047

** Customer to provide articulating arm dimensions

Accessories: (Additional Cost)

Pendulum support required for arms exceeding 14' feet (1043.0138)
Wood arm Adapter for octagonal flange, required if wooden arm is used (2069.0047)
48” Foam protective edge for octagon arm, White (3147.1000)
48” Foam protective edge for wood arm, Yellow (3147.1001)
Installed Invisa Smart Gate Sensor and Insulator block - recommended (MSR1-E900)
Invisa Smart Gate Sensor and insulator block (un-installed) (6000.0055)
Invisa Smart Gate Insulator Block (un-installed) (6000.0056)
Single channel loop detector 24 VDC (MID1E-800)
Dual channel loop detector 24 VDC (MID2E-800)
Glue on edge protection of sponge rubber 7/8 x 3/8 inches per foot (3147.007)

larger image

View more items in Vehicle Access Control