Model 2406 is a fully recessed, barrier-free, wall mounted drinking fountain and cuspidor combination in an 18 gauge, Type 304 Stainless Steel with a satin finish. It is designed to be installed above a wheelchair access area. It features front mounted push button valve and vandal-resistant, polished chrome-plated brass bubbler head and waste strainers. Piping to cuspidor spreader is furnished. Push button valve on the drinking fountain activates cuspidor flushing. The mounting includes hanging brackets and screws, and 1-1/4" O.D. waste arms. Provision for traps (not included) must be made in or behind wall.

Model 2406 meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.

Components:

Bubbler Head: Model 5705, sculpted, polished chrome-plated brass, shielded, anti-squirt, integral basin shank, vandal-resistant bubbler head features laminar flow to prevent splashing.

Valve: Model 5815, lead-free, plastic check valve used on most Haws pedestal freeze-resistant drinking fountain valves. 1/8" NPT(M) inlet. Used on cuspidors and freeze-resistant pedestal drinking fountain valves.

Valve: Model 5874, push button activation, front adjustable, front access for strainer cleaning with automatic pressure regulation with fully adjustable flow.

Waste Strainer: Model 6454.1, polished chrome-plated solid brass flat waste strainer less locking lugs with washer, locknut and slip joint tailpiece.

Push Button: Model PBA6, push button assembly has a polished chrome-plated finish.

Accessory: 0006983506 Spanner wrench is used to remove retaining ring for cartridge for 5874 valve assembly, and the VRK5874 kit.

Options: (Additional costs may apply)

Recessed Drinking Fountain: Model 2403, fully recessed, stainless steel drinking fountain/cuspidor combination with satin finish.

Recessed Drinking Fountain: Model 2405, fully recessed, barrier-free, stainless steel drinking fountain with satin finish.

Recessed Cuspidor: Model 2401, fully recessed, stainless steel cuspidor with satin finish can be installed alone or along side any full recessed drinking fountain, or electric water cooler as an option to provide a fountain/cuspidor combination.

Filter: Model 6426, 12" x 2", in-line lead removal element that reduces lead from incoming water supply to levels below 15 ppb for up to 500 gallons. Filter has a maximum flow of .5gpm. Therefore, only 1 bubbler may be operated at a time on dual units.

Chiller: Model HCR8, chiller provides for instantaneous cooling to meet a continuous demand for chilled water.

DISCLAIMER: Continued product improvements make specifications subject to change without notice.