Model H1109.8 is a barrier-free, Type 304 Stainless Steel with
satin finish, electric drinking fountain ideal for many locations.
The one-piece rectangular bowl with rounded corners is
designed for durability and easy maintenance. The back panel
and grille match the finish of the fountain. The slots on the
grille are designed to eliminate any sharp edges, and they are
small enough to prevent intrusion from fingers or objects. The
grille is backed with a foam filter that protects the fan motor
and compressor from dust and debris. Model H1109.8
includes fountain with back panel, grille, mounting frame, 8
GPH chiller and a front adjustable valve. The refrigeration
system is balanced to provide low energy usage and a longer
life assured by utilizing a high displacement compressor, a
counterflow cooling evaporator/chiller, efficient capillary sizing,
a large capacity dryer-strainer, and a fan-cooled condenser
with maximum heat exchange. 115V, 60Hz. Environmentally
friendly R134a refrigerant is controlled by calibrated capillary
tube.
Capacity is based on ARI standard rating conditions of 80°F
inlet water temperature, 90°F room temperature, 50°F drinking
water temperature.
Haws manufactures drinking fountains, electric water coolers
and electric drinking fountains to be lead-free by all known
definitions including ANSI/NSF Standard 61, Section 9,
California Proposition 65 and the Federal Safe Drinking Water
Act.
Diagram: (pdf)
Components:
Bubbler Head: Model 5703M, polished chrome-plated forged
brass, integral basin shank, shielded, anti-squirt,
vandal-resistant bubbler head.
Valve: Model 5874, push button activation, front adjustable,
front access for strainer cleaning with automatic pressure
regulation with fully adjustable flow.
Waste Strainer: Model 6462, polished chrome-plated brass
vandal-resistant combination waste strainer and tailpiece
assembly.
Push Button: Model PBA6, push button assembly has a
polished chrome-plated finish.
Trap: Model 0005982900, low profile trap 1-1/4"NPT x 1-1/4"
O.d. satin chrome-plated brass.
Back Panel: Model BP3, satin finish stainless steel back
panel.
Bottom Plate: Model PBM1109, bottom plate with vandal
resistant screws.
Accessory: 0006983506 Spanner wrench is used to remove
retaining ring for cartridge for 5874 valve assembly, and the
VRK5874 kit.
Mounting: Model MTGFR.SM, small adjustable mounting
frame manufactured of heavy gauge galvanized steel with
pre-drilled mounting holes. Mounting frame may be shipped
prior to cooler for roughing-in installation.
Chiller: Model HCR8, chiller provides for instantaneous
cooling to meet a continuous demand for chilled water.
Options: (Additional costs may apply)
Wall Mounted Drinking Fountain: Model 1109, single bubbler, wall
mounted, barrier-free, stainless steel drinking fountain with satin finish.
Barrier-Free Electric Drinking Fountain: Model H1109.8HO,
barrier-free, electric sensor activated, 18 gauge, Type 304 Stainless
Steel with a satin finish electric drinking fountain.
Barrier-Free Electric Drinking Fountain: Model H1119.8, barrier-free,
"Hi-Lo", wall mounted, stainless steel electric drinking fountain with a
satin finish.
Filter: Model 6426, 12" x 2", in-line lead removal element that
reduces lead from incoming water supply to levels below 15 ppb for up
to 500 gallons. Filter has a maximum flow of .5gpm. Therefore, only 1
bubbler may be operated at a time on dual units.
DISCLAIMER: Continued product improvements make
specifications subject to change without notice. |
