Model H1001.8HPS electric water cooler provides 8 gallons per hour of chilled water. It is manufactured in Type 304 high polished stainless steel. The back panel and grille match the finish of the fountain. This fountain features a round sculpted bowl where the bubbler, waste strainer and push button are polish chrome-plated. The slots on the grille are designed to eliminate any sharp edges, and they are small enough to prevent intrusion from fingers or objects. The grille is also backed with a foam filter that protects the fan motor and compressor from dust and debris. Model H1001.8HPS includes fountain with back panel, grille, mounting frame, vandal-resistant bottom plate, front adjustable valve, 1-1/4" O.D. waste arm and 8 GPH chiller. The refrigeration system is balanced to provide low energy usage and a longer life assured by utilizing a high displacement compressor, a counterflow cooling evaporator/chiller, efficient capillary sizing, a large capacity dryer-strainer, and a fan-cooled condenser with maximum heat exchange. 115V, 60Hz. Environmentally friendly R134a refrigerant is controlled by calibrated capillary tube. Capacity is based on ARI standard rating conditions of 80°F inlet water temperature, 90°F room temperature, 50°F drinking water temperature. The H1001.8HPS is manufactured to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.

Components:

Bubbler Head: Model 5705, sculpted, polished chrome plated brass, shielded, anti-squirt, integral basin shank, vandal-resistant bubbler head features laminar flow to prevent splashing.

Valve: Model 5874, push button activation, front adjustable, front access for strainer cleaning, with automatic pressure regulation with fully adjustable flow.

Waste Strainer: Model 6463PCP, polished chrome-plated vandal-resistant waste strainer with anti-airlock draining feature.

Push Button: Model PBA6, push button assembly has a polished chrome-plated finish.

Back Panel: Model BP6HPS, high polished stainless steel back panel.

Bottom Plate: Model PBM1000, stainless steel bottom plate for 1000 series "swirl" bowl bracket.

Accessory: Spanner wrench is used to remove retaining ring for cartridge for 5874 valve assembly, and the VRK5874 kit.

Mounting: Model MTGFR.SM, small adjustable mounting frame manufactured of heavy gauge galvanized steel with predrilled mounting holes. Mounting frame may be shipped prior to cooler for roughing-in installation.

Chiller: Model HCR8, chiller provides for instantaneous cooling to meet a continuous demand for chilled water.

Options & Accessories: (Additional cost)

Wall Mounted Drinking Fountain: Model 1001HPS, barrier-free, high polished stainless steel drinking fountain with sculpted bowl.

Barrier Free Electric Drinking Fountain: Model H1000.8, barrier free, mirror gold plated electric water cooler with round sculpted bowl.

Barrier Free Electric Drinking Fountain: Model H1001.8, barrier free, satin finish, Type 304 stainless steel, electric water cooler with round sculpted bowl.

Barrier Free Electric Drinking Fountain: Model H1011.8HPS, barrier free, high polished stainless steel, dual height, electric water cooler with round sculpted bowl.

Filter: Model 6426, 12" x 2", in-line lead removal element that reduces lead from incoming water supply to levels below 15 ppb for up to 500 gallons.Filter has a maximum flow of .5gpm. Therefore, only 1 bubbler may be operated at a time on dual units.